Filter
Top Products
63
Getting Started
Route Memory Full —
No additional routes can be saved.
Route Truncated —
Uploaded route from another device has more than 50
waypoints.
Route Waypoint Memory Full —
No additional route waypoints can be saved.
Shallow Water —
The water is shallower than the amount set in the Shallow
Water Alarm.
Track Already Exists —
A saved track with the same name already exists.
Track Memory Full —
No more track data can be stored without deleting old
data.
Track Log Full —
Indicates the track log is full and track recording has been
turned off. To be able to record more track points you will need to clear the
track log and turn track recording on. This will only be displayed when the track
recording setting is set to ‘Stop When Full”.
Track Truncated —
A complete uploaded track will not fi t in memory. The oldest
track log points have been deleted.
Transfer Complete —
Data transfer has been completed.
Waypoint Already Exists —
A waypoint with the same name already exists.
Waypoint Memory Full —
The unit has stored the maximum number of
waypoints.
Appendix F
Messages
76S manual.indd 63 4/23/2002, 3:04:18 PM