Filter
Top Products
29
Getting Started
Reference
Track Page Options
Track Page Options
To display the Track Options, from the Track Page, press the MENU Key.
Delete Saved Track —
If you have saved tracks, this option will allow you to
delete the saved track.
Delete All Tracks —
This option will delete all saved tracks.
Setup Track Log —
This selection displays the Track Log Setup menu. This
menu contains options for Track Recording, Record Method, and Interval.
• Recording — ‘Off’, ‘Wrap When Full’ or ‘Stop When Full’. If ‘Wrap When
Full’ is selected, when track memory is full, the oldest track
point will be deleted and a new point added at the end.
• Record Method — Can be set to ‘Auto’, ‘Time’ or ‘Distance’.
• Interval — is used to select or enter an interval for the Record Method.
Track Information Page
To access information on a Saved Track, highlight the desired track then press
ENTER. This will display the Track Information Page.
The Track Information Page contains data fi elds for the Name, Distance, and
Points. There are four Option Buttons along the bottom of the page.
Name —
this fi eld will allow you to change the Saved Track Name. When
tracks are saved the GPSMAP 76S will use a date as the default track name.
Distance —
shows the total distance of the Saved Track.
Points —
shows the number of track log points in the Saved Track.
Area —
shows calculated acreage within the track. The end points of the
track will be connected with a straight line when calculating area. If a track
crosses itself, the area calculation will not be accurate.
Track Page Options
Main Menu — Track Page
76S manual.indd 29 4/23/2002, 3:03:59 PM