Filter
Top Products
38 GPSMAP 76Cx Owner’s Manual
MAIN PAGES > MAP PAGE
Map Page
The GPSMAP 76Cx comes with a built-in basemap
that includes a database of cities, interstates, state and
county highways, exit information, and lake and river
outlines. The standard basemap can be enhanced with
MapSource or BlueChart data.
Two map operating modes, position mode and pan
mode, determine what cartography is shown on
the map. Position mode pans the map to keep your
present location in the screen area. The position
marker shows your travel on the Map Page. When
you press the ROCKER, the GPSMAP 76Cx enters
pan mode, which moves the map to keep the white
arrow (map pointer) within the screen area.
When you are in pan mode, you can move the map
pointer about the page to highlight and identify map
items. If there is more than one map item under the
pointer, a list appears with the item selected on the
map and highlighted on the list.
You can add and configure up to four optional data
fields to the top of the page to provide a variety of
travel and navigational information.
To show data fields on the Map Page:
1. Press MENU to open the Map Page Options
Menu.
2. Highlight Data Field, and press ENTER. The
Show sub-menu appears.
3. Select the number of data fields you want to
show on the Map Page, and press ENTER.
Data fields
Show sub-menu
Map Page with data fields