Filter
Top Products
Going To a Waypoint
Once you’ve stored the “CHANNL” waypoint in
memory, you can use the GPS 126/128 to guide you to
it by performing a simple GOTO. A GOTO is nothing
more than a straight-line course from your present posi-
tion to the destination you’ve selected.
Use caution when navigating. A “straight-line”
course reflects the shortest distance to a waypoint,
and does not navigate around obstructions, such
as land or buoys, etc.
Now that you have moved away from ‘CHANNL’ for
three minutes, let’s try navigating back to it.
To select a GOTO destination:
1. Press the
G
key.
2. The GOTO waypoint page will appear, displaying all the
waypoints in memory in alphabetical order.
3. Use
U
or
D
to highlight the ‘CHANNL’ waypoint.
4. Press the
F
key to confirm that you want to navi-
gate to the displayed waypoint.
5. Press the
J
key to view the Graphic Highway Page.
11
The GOTO waypoint page
allows you to select your
destination from a list of all
available waypoints in the
GPS 126/128’s memory.
GETTING
STARTED
Going To a
Waypoint
Once a GOTO is activated,
the GPS 126/128 will
provid steering guidance
until the GOTO is can-
celled. To cancel a GOTO,
highlight the cancel prompt
at the bottom of the page
and press ENTER.
!
Bearing to
Waypoint
Destination
Waypoint
“Finish Line”
CDI Scale
Distance to
Waypoint
Destination Waypoint
User-
Selectable
Fields
Track Over
Ground
Speed Over
Ground
Your Relative
Position
Directional
Pointer
126/128 Manual (new) 6/15/98 9:50 AM Page 11