Filter
Top Products
32
The ‘BEGIN’ point is
the point defi ning the
starting point when
saving a track log.
‘END’ is the last point
that was saved. Each
saved track will always
have a ‘BEGIN’ and
‘END’ point for
navigation. The
‘BEGIN-END’ pair
imply the direction of
the saved track. If you
want to retrace the
track, navigate to
‘END’. If you want
to track back to the
starting point, navigate
to ‘BEGIN’.
Reference
Track Logs
To delete all tracks:
1. On the ‘TRACK LOG’ Page, press the UP or DOWN
Button and highlight ‘DELETE ALL’. Press ENTER.
The verifi cation window appears.
2. If you really want to delete all saved tracks, press
the UP or DOWN Button and highlight ‘YES’. Press
ENTER. If you change your mind, press the UP or
DOWN Button and select ‘NO’. Press ENTER. The
tracks remain in memory (or press PAGE to exit).
To delete a saved track:
1. On the ‘TRACK LOG’ Page, press the UP or DOWN
Button and highlight the saved track that you
want to delete from the ‘SAVED TRACKS’ list. Press
ENTER. The saved track appears graphically.
2. Press the UP or DOWN Button and highlight
‘DELETE’. Press ENTER. A confi rmation window
appears asking you if you really want to delete
the saved track. If you do, press the UP or DOWN
Button and highlight ‘YES’. Press ENTER. If you
change your mind, press the UP or DOWN Button
and select ‘NO’. Press ENTER (or you can press
PAGE to exit). The tracks remain in memory.
To start TracBack Navigation:
1. On the ‘TRACK LOG’ Page, press the UP or DOWN
Button and highlight the saved track from the
‘SAVED TRACKS’ that you want to travel. Press
ENTER. The track graphically appears.
2. Press the UP or DOWN Button and highlight
‘TRACBACK’. Press ENTER. The direction window
appears asking you if you want the destination to
be at the beginning of the track or the end of the
track (see sidebar). Press the UP or DOWN Button
and select the desired destination point. The ‘NAVI-
GATION’ Page guides you to your destination.
You may not remember the original direction of the
saved track, but by using ‘BEGIN’ or ‘END’, you can
always select where you want to “TracBack to” without
remembering the directions of the saved track.
etrex manual.indd 32 2/19/2003, 1:37:19 PM