Filter
Top Products
7-5
· Enter the waypoint name DRYT, latitude
(N24°38.00') and longitude (W082°
55.07').
Create a waypoint named KFMY which is the name for Fort Myers Airport.
(This waypoint should already be stored in the Americas version database.)
· Move the cursor back under the waypoint name field.
· Enter the waypoint name KFMY,
latitude (N26°35.17'), and longitude
(W081°51.81').
Now that the sample waypoints are in memory, create the sample route using
these waypoints.
Create the sample route...
· Press RTE until the Route Catalog Page
is displayed.
· Press MORE until the route 1 is displayed.
(NOTE: This example assumes route 1 is
empty.)
· Press ENT. You have just selected the
Route Review Page for route 1. Notice
that the route does not contain any
waypoints (“L0” indicates leg 0 is
displayed).