Filter
Top Products
64 Astro 320 and DC40 Owner’s Manual
Device Information
3. Check for DC 40 software updates.
The DC 40 software is stored on
your Astro until you are ready to
load it wirelessly.
Before you can load the software to the
DC 40, you must get the software from
WebUpdater.
1. Turn on the DC 40, and bring it
within range of the Astro.
NOTE: To avoid data corruption,
do not turn off the Astro or the
DC 40 during data transfer.
2. From the main menu, press DOG
twice.
3. Select a dog.
4. Select Show Info.
5. Press MENU.
6. Select Upgrade Dog Unit.
7. Follow the on-screen instructions.
The DC 40 software is saved on the
Astro, so you can update additional
DC 40 devices in the eld.