Filter
Top Products
Astro 320 and DC40 Owner’s Manual 47
Customizing Your Device
2. From the compass or trip computer,
press MENU.
3. Select Change Dashboard.
4. Select a dashboard.
From the main menu, select Setup >
System.
• GPS—sets the GPS to Normal,
WAAS/EGNOS (Wide Area
Augmentation System/European
Geostationary Navigation Overlay
Service), or Demo Mode (GPS
off). For information about WAAS,
go to www.garmin.com/aboutGPS
/waas.html.
• Language—sets the text language
on the device.
NOTE: Changing the text language
does not change the language of
user-entered data or map data, such
as street names.
• Battery Type—allows you to select
the type of AA battery you are
using (page 57).
From main menu, select Setup > Dogs.
• Dog Track Length on Map—sets
the length (duration in minutes or
hours) of the dog track on the map.
• Zoom Map to Dogs—
automatically zooms out the map to
show all of the dogs’ locations and
your location unless you use the
Rocker to manually pan the map.
• Dog Alerts—sets dog alerts to
Tone Only, Vibrate Only, Tone
and Vibrate, or Off.
◦ On-Point Alert—indicates that
the dog is on-point.
◦ Treed Alert—indicates that the
dog has treed quarry and has
conned its own movements to
a small area for 60 seconds.