Filter
Top Products
24 Astro 320 and DC40 Owner’s Manual
Waypoints, Routes, and Tracks
You can create a new location by
projecting the distance and bearing
from a marked location to a new
location.
1. From the main menu, select Tools >
Waypoint Mgr..
2. Select a waypoint.
3. Press MENU.
4. Select Project Location.
5. Follow the on-screen instructions.
6. Select Save.
A route is a sequence of points or saved
locations that leads you to your nal
destination. To customize your route
settings, see page 53.
1. From the main menu, select Tools >
Route Planner > Create Route.
2. Select Select First Point.
3. Select a category.
4. Select the rst point on the route.
5. Select Use.
6. Repeat steps 2 through 5 to add
more points to the route.
1. From the main menu, select Tools >
Route Planner.
2. Select a route.
3. Select View Map > Go.
1. From the main menu, select Tools >
Route Planner.
2. Select a route.
3. Select Edit Route.
4. Select a point.