Garmin 19800149402 GPS Receiver User Manual


  Open as PDF
of 24
 
9GPSMAP 4000/5000 Series Installation Instructions
5. InserttheO-ringintotheendoftheconnector.


The GPSMAP 4000/5000 series chartplotter must be connected to the power supply for the boat. Use the 2-pin power cable included, and
connect the power (red) and ground (black) wires.
NOTES:
• Use 14 AWG shielded wiring for extended runs of wire to the power cable.
• Solder all connections and seal them with heat-shrink tubing.
 previous next