Garmin 19800149402 GPS Receiver User Manual


 
14 GPSMAP 4000/5000 Series Installation Instructions

x
x
x
x
x
x
x
x
xxxxxxxxxxxxxxxxxxx
Garmin
GPSMAP 4000/5000
series chartplotter
GSD 22 sounder unit
To transducer
Garmin marine radar
Garmin
GPSMAP 3000 series
chartplotter
GMS 10 marine network port expander
GDL 30/30A
XM weather receiver
NOTES:
When connecting a GPSMAP 4000/5000 series chartplotter to an existing Garmin Marine Network, the GMS 10 can be used but is not
necessary. The GPSMAP 4000/5000 series chartplotter has three network ports and acts as a port expander. Wire the GPS antenna and
additional NMEA devices to either the existing GPSMAP 3000 series chartplotter or the new GPSMAP 4000/5000 Series chartplotter. The
existing GPSMAP 3000 series chartplotter and the new GPSMAP 4000/5000 series chartplotter share NMEA 0183 data and Garmin Marine
Network data, but do not share cartography.
Every device connected to the Garmin Marine Network must be connected to the power supply for the boat. This diagram shows the network
connections; however, it does not show the power connections. Wire each device according to the appropriate installation instructions.
This diagram shows the Garmin Marine Network connections; however, it does not show NMEA 2000 or NMEA 0183 connections.