Filter
Top Products
4
Initializing the Receiver
Getting Started
The GPSMAP 182/232’s advanced keypad system is designed to allow for fast, convenient selection
of navigation options and data entry. The Getting Started Tour will introduce you to the keypad and
provide a ‘hands-on’ lesson in using the GPSMAP 182/232. We strongly encourage you to take the
Getting Started tour before using your unit for actual navigation.
The GPSMAP 182/232 Quick Reference Guide contains helpful tips on using the unit and perform-
ing various navigation tasks. It’s a good idea to keep the Quick Reference Guide nearby whenever you’re
operating your new GPSMAP 182/232.
Initializing the Receiver
The fi rst time you power up your new GPSMAP 182/232, the receiver must be given an opportu-
nity to collect satellite data and establish its present position. To ensure proper initialization, the
GPSMAP 182/232 is shipped from the factory in AutoLocate mode, which will allow the receiver to
“fi nd itself” anywhere in the world. To speed up the initialization process, we recommend using the
graphic initialization process described on the next page, which will usually provide a position fi x
within a few minutes.
Before you initialize, make sure the GPSMAP 182/232 unit and antenna have been correctly
installed on your vessel according to the instructions in Appendix G. The antenna needs to be in a
location with a clear and unobstructed view of the sky to receive satellite signals.
To turn the GPSMAP 182/232 on:
1. Press and hold the POWER key until the power tone sounds and the display comes on, then
release the POWER key.
A warning page will appear, asking you to read and acknowledge important information regarding
the proper use of the unit.
To acknowledge the warning:
1. After reading the warning, press the ENTER/MARK key if you agree.
GPSMAP 182/232
Warning Screen
182_232 Manual Part 1.indd 12/21/01, 11:43 AM4