Garmin 1204 Radar Detector User Manual


  Open as PDF
of 14
 
GMR
™
600/1200 Series Radar Installation Instructions
Properly install your GMR 600/1200 series radar according to the following instructions. 

®

Before installing your GMR 600/1200 series radar, conrm that the package contains the items listed on the box. If any parts are missing,
contact your Garmin dealer immediately.
Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.
The selected radar mounting location must be able to hold the weight of the radar and withstand any inertial forces.
The radar transmits electromagnetic energy. It is important that the radar is turned off or the DC power input is disconnected when
personnel are required to come close to the radar to perform work on the radar assembly or associated equipment. Electromagnetic energy is harmful.
When the radar is transmitting, do not look directly at the antenna at close range, because the eyes are the most sensitive part of the body to
electromagnetic energy.
When drilling or cutting, always check the opposite side of the drilling or cutting surface.
Product Registration
Help us better support you by completing our online registration today. Go to http://my.garmin.com. Keep the original sales receipt, or a
photocopy, in a safe place.
Contact Garmin
Contact Garmin Product Support if you have any questions while installing your GMR 600/1200 series radar. In the USA, go to
www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to www.garmin.com/support and click  for in-country support information, or contact Garmin (Europe) Ltd. by
phone at +44 (0) 870.8501241.
Needed Tools
For Installing the Radar:
#2 Phillips screwdriver
5 mm Allen wrench
Drill and drill bits
Wrench and socket set
For Installing the Optional Field-Installable RJ-45 Network Connector:
Knife
Pliers
15 mm wrench
AMP modular-plug hand tool and die set or compatible equivalent
•
•
•
•
•
•
•
•
March 2010 190-01067-02 Rev. D Printed in Taiwan
next