Fusionbrands CA-CD800 GPS Receiver User Manual


 
6
BASIC OPERATIONS
1. OPEN
Press this button to flip open and detach the control panel.
2. ENCODER VOLUME CONTROL
Rotate the encoder volume to increase and decrease the volume.
3. iPod/iPhone INTERNAL/EXTERNAL CONTROL
Press this button to switch between iPod/iPhone control from
either the unit or from the device itself.
4. ENCODER VOLUME CONTROL AUDIO/ENTER FUNCTIONS
a) AUDIO. Press this button to enter the Audio Menu mode.
b) ENTER. In Media playback mode and Menu functions, press this
button to confirm a selection (ENTER).
5. MUTE – POWER ON/OFF
a) Press this button to turn Mute ON or OFF
b) Press this button to turn the unit on. Press and hold to turn the unit off.
6. ANSWER KEY
In Bluetooth Handsfree mode:
REMOVAL/RE-ATTACHMENT
OF THE FACE
PLEASE NOTE
• If any function does not work, open the front panel & re-close.
• Do not touch the contact pins on the rear of the face as this could
cause contact problems. If the contacts become dirty, please
clean with a soft cloth.
• Petrol and other solvents must not come in contact with the
front face
• Please use the supplied plastic case to store the front face when
it is removed from the unit.
• For security purposes, please ensure that when removed, the
face is stored out of sight if left in the vehicle.
1. Press the Panel OPEN button.
2. After flipping down the front panel, push it to the right (A),
then draw the left of the front panel outwards (B)
3. To re-attach the face, please complete the above steps in reverse.