Filter
Top Products
18
TROUBLESHOOTING
Before going through the check list, please check the wiring
connection diagram. If problems persist, please consult
your Car Audio dealer.
No power or no sound
• Ignition is not on. Turn the Ignition to “accessories”
• Unit is off - press the power button to activate the unit.
• Fuse is blown. Please replace the fuse.
• If the speakers are connected to the speaker outputs,
check the speaker connections.
• If the speakers are connected to amplifier/s only, check
that they are operating correctly.
• If the above solutions do not help, please press the RESET button.
Noise in radio broadcasts
• Signals are too weak, turn LOC off.
• Check the antenna connection or replace the antenna if
necessary.
Preset stations lost
• Yellow power cable is not correctly wired. Ensure it is
connected to Constant 12V (+).
Unable to Eject Disc
• Press & hold the Eject button .
Display shows ERR-1
• The USB or SD device cannot be read. Confirm the device
is formatted to FAT32 (Windows) file system.
Display shows ERR-3
Vol Up Volume Up
Vol Down Volume Down
Track Up Track Up
Track Down Track Down
Preset Down Sub Level Down
Preset Up Sub Level Up
Please visit www.fusionelectronics.com to check for
available interfaces as they become available.
OPTIONAL REMOTE
CONTROL
The CA-REM1 IR Remote Control is available to suit this unit.
Please consult you Car Audio retailer for pricing
and availability.