Filter
Top Products
15
1. Press MENU to enter the system menu.
Keep pressing until [CONNECT>] is displayed.
2. Press ENTER on the Encoder Volume Control.
[WAITING] will be displayed on the LCD display, followed
by [CONNECTED] when completed.
MEDIA PLAYBACK (CD/
USB/SD/AUX IN)
CD PLAYBACK
You can play the following format CD’s
• Commercially Available pre-recorded CD’s
• CD Recordable (CD-R)
• CD Re-writeable (CD-RW)
• MP3 CD’s
• WMA CD’s
NOTE: Please ensure that the disc contains these file types only.
1. Press OPEN on the front panel to open the flip down panel.
2. Insert a CD with the printed side facing up, then close the
panel. The CD will start playing automatically.
• Press to pause the music playback. Press this button
again to resume music playback. NOTE the volume level
can be adjusted while the unit is paused
• Press the to skip forward to the beginning of the
next or previous chapter/track.
• Press and hold to fast forward or fast rewind
through the track.
3. Press to eject the CD.
USB OPERATION
Insert the USB Device
1. Open the cover marked on the front panel.
2. Insert the USB
device into the USB
socket. The unit will
start playing from
the USB device
automatically.
3. USB storage devices can be
used in the Front, Rear USB port of both.
Removal of the USB Device
Before removing the USB device, always remember to
switch to another Source then remove the USB device.
SD CARD OPERATION
Insert the SD Card
1. Press the OPEN button on the front face.
2. After flipping down the front face, push it to the right then
draw the left of the face outwards to remove it.