Filter
Top Products
35
5. MENU DESCRIPTION
This chapter provides menu information not discussed in previous chapters.
5.1 File Menu
Connect to Sonar
head
Use this command to communicate with the TS331A underwater unit.
The control software begins to interrogate the sonar unit for data in
real-time through an RS-232 connection. The system uses COM2 as
the default serial port for communications between the analog interface
board and surface control system.
Print Prints an image of the currently selected window.
Print Preview
Displays the currently selected window on the screen, as it would
appear printed.
Print Setup Selects a printer and printer connection.
Exit
Use this command to terminate your TS-331A program. System will
save your display layout, sonar settings and sensor enable/disable
status to default.cfg file. The next time you start the program, the
system will load these default settings.