Filter
Top Products
i
SAFETY INSTRUCTIONS
Do not place liquid-filled containers on
the top of the surface processor unit.
Fire or electrical shock can result if a liquid
spills into the unit.
Immediately turn off the power at the
switchboard if the surface processor
unit is emitting smoke or fire.
Continued use can cause fatal damage to
the equipment. Contact a FURUNO
agent for service.
Make sure no rain or water splash leaks
into the surface processor unit.
Fire or electrical shock can result if water
leaks in the unit.
Use the proper fuse.
Use of a wrong fuse can result in damage
to the equipment or cause fire.
Use the proper battery in the surface
processor unit.
The mother board in the surface processor
unit has a battery which stores settings
when the power is off. Use the correct
battery and install it properly to prevent
explosion of the battery.
WARNING
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury can
result.
Immediately turn off the power at the
switchboard if water leaks into the
surface processor unit.
Continued use of the equipment can cause
fire or electrical shock. Contact a FURUNO
agent for service.
Install batteries in the catch sensor with
correct polarity.
Improper polarity or size may cause the
batteries to explode.
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the surface
processor unit.
Only qualified personnel should
work inside the equipment.
A warning label is attached to the surface
processor unit. Do not remove the label.
If the label is missing or damaged,
contact a FURUNO agent or dealer about
replacement.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
Name: Warning Label (1)
Type: 86-003-1011-1
Code No.: 100-236-231
WarningLabel