Filter
Top Products
6. INITIAL SETTINGS
22
14) Output data from the computer. When loading data is completed, the cursor shifts to
Stop.
15) Press the MENU ESC key.
Setting DATA 4 to DGPS
An external DGPS receiver can be connected to the DATA 4 port.
Follow the procedure below to setup the GP-150 according to the specifications of the
DGPS receiver.
1) Press MENU ESC, 9 and 5.
2) Press
S or T to select Level.
3) Press
W or X to select level; RS232C or RS422.
4) Press the NU/CU ENT key.
5) Press
W or X to select DGPS.
6) Press
T to select To Next Page.
DATA 4 I/O SETUP <DGPS> 2/2
To previous Page
First Bit
Parity
Stop Bit
Baud Rate
: Select
ENT: Enter MENU: Escape
MSB LSB
EVEN ODD NONE
12
4800 9600
DATA 4 I/O SETUP <DGPS> menu
7) Press
S or T to select First Bit.
8) Press
W or X select first bit; MSB or LSB.
9) Press
T to select Parity.
10) Press
W or X to select parity bit; EVEN, ODD or NONE.
11) Press
T to select Stop Bit.
12) Press
W or X to select stop bit; 1 or 2.
13) Press
T to select Baud Rate.
14) Press
W or X to select baud rate; 4800 or 9600.
15) Press the NU/CU ENT key.
16) Press the MENU ESC key.