Filter
Top Products
-1.43-
1.47.4 Displaying the radar map
1. Press the [MENU] key to display the Main menu.
2. Press the [8] key twice to display the MARK menu.
3. Press the [2] key to select ON from the DISP field.
4. Press the [ENTER/SELECT] key followed by the [MENU] key.
1.47.5 Erasing contents of the radar map
1. Press the [MENU] key.
2. Press the [8] key twice to display the MARK menu.
3. Press the [3] key 2-3 times to select the method of erasure: NO (individual marks), DISPLAY
(marks currently displayed), or ALL (all marks).
4. Press the [ENTER/SELECT] key followed by the [MENU] key.
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
Navline
Own ship safe contour
Separation zone
Approximate coastline
Planned route
Own ship vector
Target being tracked
Heading line
Heading marker
North marker
Past position
ATA: Equally time-spaced positions of any
targets being tracked.
EPA: Past plot positons may not be equally time-
spaced, up to the operator. Targets not plotted
over 10 min will be dropped.
Dangerous side of own ship
safe contour may be
marked like this.