Filter
Top Products
303-06-9 303-06-9Starting System
DIAGNOSIS AND TESTING (Continued)
PINPOINT TEST A: THE ENGINE DOES NOT CRANK AND THE RELAY DOES NOT CLICK (Continued)
Test Step Result / Action to Take
A11 CHECK CIRCUIT 32 (RD/LB) FOR AN OPEN (Continued)
• Measure the resistance between CPP switch C257-2, circuit 32
(RD/LB) and starter motor relay C1017-85, circuit 32 (RD/LB).
Yes
INSTALL a new CPP switch. REFER to
Section 303-14. TEST the system for
normal operation.
No
REPAIR circuit 32 (RD/LB). TEST the
• Is the resistance less than 5 ohms? system for normal operation.
A12 CHECK THE STARTER MOTOR RELAY GROUND CIRCUIT FOR
AN OPEN
• Key in START position.
(Continued)
2005 Mustang, 12/2004