Filter
Top Products
303-06-5 303-06-5Starting System
DIAGNOSIS AND TESTING (Continued)
PINPOINT TEST A: THE ENGINE DOES NOT CRANK AND THE RELAY DOES NOT CLICK (Continued)
Test Step Result / Action to Take
A3 CHECK CIRCUIT 33 (WH/PK) (CIRCUIT 32 [RD/LB] MANUAL
TRANSMISSION ONLY) FOR VOLTAGE (Continued)
• Measure the voltage between starter motor relay C1017-85,
circuit 33 (WH/PK) (circuit 32 [RD/LB] manual transmission only)
and ground while holding the key in the START position and
with the clutch pedal, if equipped, fully depressed.
Yes
GO to A12.
No
Vehicles equipped with an automatic
transmission, GO to A4. Vehicles
equipped with a manual transmission, GO
• Is the voltage greater than 10 volts? to A7.
A4 CHECK CIRCUIT 32 (RD/LB) FOR VOLTAGE AT THE DIGITAL
TR SENSOR (AUTOMATIC TRANSMISSION ONLY)
• Key in OFF position.
• Disconnect: Digital TR Sensor C167.
• Key in START position.
(Continued)
2005 Mustang, 12/2004