2007 E-Series Wagon
29
E-SERIES WAGON
May 2006
E-Series Wagon
Axles
FRONT AXLE SPECIFICATIONS
Model/Series E-150 Wagon E-350 Super Duty Wagon
Max. Rating @ Ground (lbs.) 4600 4600
Type Twin-I-Beam Spindle with Ball Joints Twin-I-Beam Spindle with Ball Joints
Axle — Material Nodular Cast Iron
— Spring Centers (in.) 47.0 47.0
Radius Arms — No. 2
— Material Stamped High-Strength Low-Alloy Steel
Ball Joint — Lubed for Life Ball Joints
Spindle — Material Nodular Cast Iron Body with
Forged Steel Stem
Wheel Bearings — Type Tapered Roller
REAR AXLE SPECIFICATIONS
Model/Series E-150 Wagon E-350 Super Duty Wagon
Make — Ford Dana 9.75” HD
Rating @ Ground (lbs.) 5520 6340
Type — Semi-Floating
Driveline Attachment (in.) — 4.25 Circular Flange
Housing — Type Cast Center
— Cover Attachment Bolted
Section — Tube Diameter (in.) 3.50 3.50
— Thickness (in.) 0.33 0.33
Lubricant Capacity (pt.) 6.25 6.25
Spring Centers (in.) 48.92
Wheel Bearings — Type Straight Roller
Gears — Type Hypoid
— Material Alloy Steel
Ring Gear — Pitch Diameter (in.) 9.75 9.75 HD
Pinion — Mounting Overhung
Differential — Type 2-Pinion
— L/S Type Traction-Lok
Axle Shaft — Spline - Minor Diameter (in.) 1.36 1.36
— Spline - Major Diameter (in.) 1.45 1.45
— No. of Splines 35 35
Brakes
HYDRAULIC BRAKE EQUIPMENT SPECIFICATIONS — FRONT
Type Model/Series
Axle
Usage
(lbs.)
Rotor Dia.
(in.)
Brake
Lining
Segment
Area (sq. in.)/
Width (in.)/
Thickness (in.)
Caliper
Piston Dia.
(in.)
Gross
Lining
Area Per
Axle
(sq. in.)
Total
Swept
Area Per
Axle
(sq. in.)OD ID
Disc E-150 Wagon 3600 11.72 7.56 Outboard 9.15/1.95/0.383 2.87 36.60 220.76
Inboard
E-350 Super Duty
Wagon
4600 12.90 9.06 Outboard 12.40/1.79/0.478 2.20 49.60 270.40
Inboard
Technical Specifications
07 E-Series_Wagon.fm Page 29 Thursday, July 27, 2006 2:30 PM