Filter
Top Products
of eight keys). Your dealership can program your
new SecuriLock key(s) to your vehicle or you can
do it yourself using the following simple procedure.
To program a new SecuriLock key yourself, you
will need two previously programmed SecuriLock
keys (keys that already operate your vehicle’s
engine). If two previously programmed SecuriLock
keys are not available (one or both of your original
keys were lost or stolen), you must bring your
vehicle to your dealership to have the spare
SecuriLock key(s) programmed.
Procedure to program spare SecuriLockி keys
to your vehicle
New SecuriLock keys must have the correct
mechanical key cut for your vehicle.
Conventional (non-SecuriLock) keys cannot be
programmed to your vehicle.
You will need to have two previously programmed
SecuriLock keys and the new unprogrammed
SecuriLock key readily accessible for the
procedure. Please read and understand the entire
procedure before you begin.
1. Insert the first previously programmed
SecuriLock key into the ignition and turn the
ignition from OFF to ON (maintain ignition in ON
for at least one second).
2. Turn ignition to OFF and remove the first
SecuriLock key from the ignition.
3. Within five seconds of turning the ignition to OFF,
insert the second previously programmed
SecuriLock key into the ignition and turn the
ignition from OFF to ON (maintain ignition in ON
for at least one second but no more than five
seconds).
4. Turn the ignition to OFF and remove the second
SecuriLock key from the ignition.
5. Within 10 seconds of turning the ignition to OFF,
insert the unprogrammed SecuriLock key (new
Controls and features
59