Filter
Top Products
13
00989pr-1056
VEHICLE OPERATION
As assembled, your vehicle is ready to roll in low speed (2
1
/2 mph/4 km/h, maximum). After your child has mastered the
basic skills of driving and understands the rules for safe driving, it’s time to remove the high speed lock-out screw to allow
the vehicle to operate in low or high speed. See the instructions in this section to connect the high speed connectors and
operate the vehicle at high speed.
Beginner Use - Low Speed Drive
• Your vehicle has a patented, electronic braking system that
automatically stops the vehicle when your child’s foot lifts
from the pedal.
• Make sure your child is comfortable with steering the
vehicle and automatically knows how to stop.
STOP!
• Press a DRIVE button below the handlebar.
• Press the foot pedal. The vehicle goes forward or in
reverse at a maximum of 2½ mph/4 km/h.
• Help your child practice steering to learn how far and
how quickly to turn the handlebar when driving.
IMPORTANT! To prevent damaging the motors and
gears, teach your child to stop the vehicle before
switching direction.
Drive Buttons
Advanced Use - High Speed
• Remove the seat to access the high speed hook-up.
• Locate the high speed connector in the opening
inside the front end of the vehicle. Plug the high
speed connector (with yellow tag) into the matching
connector (with yellow tag).
• Re-assemble the seat.
• To prevent operation of the vehicle in high-speed,
simply disconnect the high speed connectors.
• Turn the right grip to shift the vehicle into high
speed. The vehicle drives forward at a maximum
of 5 mph/8 km/h.
• Help your child practice steering to learn how far
and how quickly to turn the handlebar when driving
forward in high speed.
Twist Grip
to Activate
High Speed