Fisher-Price K3034 Motorized Toy Car User Manual


 
8
K3034pr-0921
1
ASSEMBLY
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle's unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children should
not handle parts, including the battery,
or help in assembly of the vehicle.
2
• Fit the steering column and power button wire into the large
hole in the cowling. Make sure the steering column goes
through the small slot inside the vehicle.
Hint: Before inserting the steering column, locate the small slot
in the vehicle by looking into the large hole in the cowling.
Power Button Wire
Cowling Large Hole
Steering Column
In the unassembled state, this package
contains small parts. Adult assembly
is required.
CAUTION
3
IMPORTANT! An electrical connection must be made for
your vehicle to function properly. Please follow these
instructions carefully.
• Carefully stand the vehicle on end.
• Reach inside the slot in the underside of the vehicle near the
steering linkage and pull the power button connector out.
• Fit the power button connector into the motor harness connector.
Note: If the power button connector will not plug into the motor
harness connector, turn it over and try again! Do not force the
two connectors together.
BOTTOM VIEW
Rectangular Opening
Power
Button
Connector
Motor
Harness
Connector
FRONT VIEW
• While lifting the front end of the vehicle, fit the steering linkage
onto the fork. Make sure the center axle is toward the rear of
the vehicle.
• Lower the front end of the vehicle.
Center Axle
Steering Linkage
Fork