Filter
Top Products
9
ASSEMBLY
F
J5244pr-0920
3
Hint:
Y
ou may want the help of another adult to complete assembly steps
3 through 6.
• Wipe the steering column with a paper towel to remove any
excess lubricant.
• Carefully lift the front end of the vehicle.
• Insert the straight end of the steering column under the front axle,
through the slot in the vehicle and out through the large hole in the
center of the dash.
• Position the dash cover as shown. Make sure the three tabs
are upright.
• Fit the knob into the hole in the right side of the dash cover.
• Fit the key into the hole in the left side of the dash cover.
• Insert a #6 x
3
/
8
" screw into the back of the knob and into the back
of the key. Tighten the screws.
• Insert the tabs on the top of the dash cover into the slots in the dash.
• Lower the bottom of the dash cover.
• Insert two #6 x ½" screws through the dash cover and into the dash.
Tighten the screws.
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle’s unassembled state, or by
electrical items. Care should be taken in
unpacking and assembly of the vehicle.
Children should not handle parts, including
the battery, or help in assembly of
the vehicle.
WARNING
Knob
Key
Dash Cover
Tabs
Tabs
Slots
Dash
Cover
2
Steering Column
Slot
Front Axle
1
BOTTOM VIEW
DASH VIEW