Filter
Top Products
Assembly Tool
10
ASSEMBLY
F
J5244pr-0920
• Place a
3
/
8
" -16 lock nut (rounded side out) on to the end of the
steering column.
• Tighten the lock nut firmly using the closed end of the assembly tool.
• Hold the steering column in place and gently lower the vehicle.
• Position the steering wheel so that the spokes form a “Y” as shown.
• While supporting the steering column, fit the steering wheel onto the
steering column.
• Place a
3
/
8
" -16 lock nut (rounded side out) on to the end of the
steering column.
• Tighten the lock nut firmly using the closed end of the assembly tool.
• Align the slot on the steering wheel cap with the tab in the center of
the steering wheel.
• Fit the steering wheel cap into the center of the steering wheel.
• Insert two #8 x 1" screws into the steering wheel cap. Tighten
the screws.
7
5
Steering
Column
Front Axle
Lock Nut
Steering Wheel
Lock Nut
“UP”
Steering
Wheel Cap
6
• Fit the curved end of the steering column into the hole in the front axle.
Note: You may need to straighten the wheels and rotate the steering
column to fit it into the hole in the front axle.
4
Steering Column
Hole
Front Axle
Assembly
Tool
DASH VIEW