Filter
Top Products
12
F
J5244pr-0920
ASSEMBLY
T
M
13
Note: If you have already charged your Power Wheels
®
battery for
at least 18 hours, you may want to install it in the battery compartment
before assembling the hood. Please refer to the Battery Installation
section on page 15 for instructions.
• Fit the peg on one side of the hood into one of the hood openings
near the base of the windshield area.
• Gently bend the hood to insert the peg on the other side of the
hood into the opening on the other side of the vehicle.
• Lower the hood.
Hood
Openings
Pegs
• Position the tailgate with the flat side facing up.
• Fit the peg on one side of the tailgate into the tailgate opening in
the rear of the vehicle.
• Slide the peg on the other side of the tailgate into the tailgate
opening in the other side of the vehicle.
• Lift the tailgate and press firmly to snap it closed.
12
Pegs
Tailgate
Tailgate
Openings
Flat Side
FRONT VIEW