Filter
Top Products
®
Battery Installation
18
Important Note: Use only a Power Wheels
®
Type H bat-
tery with a Power Wheels
®
thermal fuse installed. Use of
any other battery or fuse will damage your vehicle. Make
sure that you charge the battery for at least 18 hours using
the enclosed Power Wheels
®
Super 6™ Volt charger
before operating your vehicle for the first time. Charge the
battery for at least 14 hours after each use of the vehicle.
Never charge the battery longer than 30 hours. Failure to
follow these instructions may damage your battery and will
void your warranty.
2
1
®
H
• Using a slotted screwdriver, rotate the lock fasteners
1
/
4
"
turn ( ) to unlock the hood.
• Open the hood.
• Place the Power Wheels
®
Type H battery upright in the
battery compartment.
• With the ends of the battery retainer curving up, fit the
ends of the battery retainer into the slots in the battery
compartment wall.
3
• Lower the battery retainer over the battery, and insert a
#8 x
7
/
8
" screw through the bend in the battery retainer
and into the vehicle body.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
Lock
Fastener
Hood
UNLOCKED LOCKED
Lock
Fastener
Battery
Retainer
Battery
WARNING
The battery and the vehicle hood provide
weight needed for vehicle stability.
DO NOT move the battery to another
location. Refasten the hood before oper-
ating the vehicle.