Filter
Top Products
11
5
6
• Slide a
7
/
16
” washer onto one of the front axles.
• Slide an axle bushing onto the front axle. Make sure the
axle bushing is positioned as shown in the illustration,
with the ring facing the washer.
• Slide a front wheel onto the front axle. Make sure that
the peg on the wheel is facing away from the
axle bushing.
• Slide a hubcap onto the front axle.
• Rotate the hubcap to make sure it is fully seated inside
the center of the wheel.
Washer
Front Axle
Vehicle Body
Axle
Bushing
Ring
Front
Wheel
Peg
Hubcap
Peg
• Fit a large cap nut on the end of the front axle.
• Tap the cap nut gently with a hammer to secure it on the
end of the axle.
• Pull on the wheel to make sure the cap nut is firmly
attached to the front axle.
• Repeat assembly steps 5 and 6 to assemble the other
front wheel.
Large Cap Nut
Front Axle
Bottom
Tabs
Slots
Grille
Front Bumper
• Face the front of the vehicle.
• Fit the tabs extending from the bottom of the grille into
the rectangular slots above the front bumper.
• Push on the grille to snap the tabs on the back of the
grille into the slots in the front of the vehicle body.
7
• Align the slots in the headlight labels with the headlight
guard slots in the hood. Apply the headlight labels
as shown.
• Make sure the areas where the labels will be applied are
clean and dry. For best adhesion, avoid repositioning the
labels once they are applied to the vehicle.
8
Assembly
1616