Filter
Top Products
22
23
Small Spring
Hinge Pin
Hinge Pin
Endcap
Dump Bed
Lever
Hinge Pin
Endcap
Hole
Dump Bed
• Insert a small spring into each hinge pin endcap.
• Fit a hinge pin endcap onto each end of the dump bed
hinge pin.
• Push in on the hinge pin endcaps and fit the endcaps
through the holes in the underside of the dump bed.
• Release the endcaps to secure the hinge pin in the
dump bed.
15
21
• Position the dump bed upside down.
• Fit the stem on the dump bed lever into the square open-
ing in the bottom of the dump bed.
• Insert a #10 x 1” screw up through the hole in the dump
bed and into the dump bed lever.
•Tighten the screw with a Phillips screwdriver. Do not over-
tighten.
Dump
Bed
Dump Bed Lever
Stem
Square
Opening
Assembly