Filter
Top Products
Assembly
• Bend the plastic tip at the end of the microphone cord so
that it forms a "T".
• Insert the "T" end of the microphone cord into the hole in
the console. Pull gently on the microphone cord to make
sure it is secure in the console.
• Hang the microphone on the console.
• Fit a hand grip onto each end of the handlebar. If it is
difficult to slide the handgrips onto the handlebar, moisten
the hand grips with warm water first.
19
Handlebar
Hole
Handgrip
Microphone
"T" End
®
R
18
• Apply labels as shown. For best results, make sure your
hands and the areas to which the labels will be applied
are clean and dry.
14
2
7
11
9
Dash and Rear View