Filter
Top Products
13
Steering
Column
Hint: You may want the help of another adult to support the
steering column near the steering linkage while assembling
the handlebar to the vehicle body.
• Slide the steering bushing, narrow side down, onto the
steering column and into the neck of the vehicle body.
Steering Bushing
15
• Fit the upper console over the handlebar and onto the
lower console.
• Press in on the top of the headlight to snap the headlight
tab into the slot on the upper console.
• Insert two #8 x 1" screws through the upper console and
into the lower console.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Upper Console
Lower Console
14
Steering
Column
Cap Nut
• Fit a cap nut on the curved end of the steering column.
• Support the steering column and tap the cap nut with a
hammer to secure it on the end of the steering column.
• Position the vehicle body upright.
17
• Slide the handlebar assembly onto the steering column,
with the headlight facing the front of the vehicle body.
• Fit a cap nut on the end of the steering column.
• Tap the cap nut with a hammer to secure it on the end
of the steering column.
• Pull up on the handlebar to make sure the assembly
is secure.
Cap Nut
Steering
Column
Handlebar
Assembly
16
Top View