Filter
Top Products
16
Assembly
• Turn the vehicle body upright.
• Face the front end of the vehicle.
• Fit the grille to the front end of the vehicle.
• Insert four #8 x
3
/
4
" screws through the grille and into the
front end of the vehicle. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
Grille
• Slide a rectangular bushing (with round opening), onto
the front axle and into the rectangular indent in the front
wheel.
• Fit a .354 cap nut on the end of a front axle.
• Cover the cap nut with the assembly tool and tap it with
a hammer until the cap nut is secure on the front axle.
• Remove the assembly tool. Pull on the cap nut to be
sure it is secure on the front axle.
• Repeat assembly steps 22 -24 to assemble the other
front wheel, rectangular bushing (with round opening)
and a .354 cap nut to the other front axle.
.354 Cap Nut
Rectangular Bushing
(with Round Opening)
Assembly Tool
Front Axle
• Turn the vehicle body over so that the bottom faces you.
• Insert two #8 x
3
/
4
" screws through the grille and into the
vehicle body. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
Hint: You may need to turn the front wheels (one at a
time) to be able to insert and tighten the screws.
Grille
Front
View
Top
View
.354"
.354 Cap Nut
Rectangular
Bushing with
Round Opening
24
26
25
Bottom View
Bottom View
73520 Dodge Ram 6/27/01 2:57 PM Page 16