Filter
Top Products
Page 11
Set Fuel Tank Full
1
Set
Fuel Tank
Full
2
3
NOTE: In order to use the “Fuel Left” function, the owner
must set this function when the fuel tank is filled or use
the set amount of fuel below. In addition, if the “Set Fuel
Tank Full” function is used, the “Fuel Tank Size” must be
set correctly to the size of the fuel tank in this application.
The computer will monitor fuel usage and calculate the
fuel left in the tank. This function does not replace the
fuel level function provided by the fuel sender and should
be used with caution.
Press and hold the “Up” and “Down” buttons for 2 seconds
to set the “Fuel Tank Full”.
Confirms the fuel available is set to the tank size selected
by the user with a beep and “Done” displayed in the LCD.
Press the “Mode” button to return to “Edit” mode.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
2
Done
Set Amount Of Fuel
1
Set
Amount
Of Fuel
2
3
NOTE: If a known amount of fuel is in the fuel tank but it
is not full, this function can be used to indicate the amount
of fuel available. The “Fuel Left” function will then use
the amount of fuel entered to calculate the “Fuel Left”
Press and hold the “Up” and “Down” buttons for 2 seconds
to enter the “Set Amount Of Fuel” function.
Press “Up” or “Down” to select another function or
“Mode” to return to “Normal” mode.
Press “Up” or “Down” to set the amount of fuel known
to be in the fuel tank. Adjust until the displayed volume
matches the known amount of fuel in the tank.
When the volume is correctly set, press & hold “Up” &
“Down” for 2 seconds to save the value and return to
“Edit” mode.
1
Fuel
Amount
XXX.X
2
3
Organize User Screens
1
Organize
User
Screens
2
3