Filter
Top Products
causes the display to change to the
“settings” submenu (see Figure 1).
Fu
el Used “Settings” Menu
There are two items in the Fuel
Used
“Settings” Menu; Reset and Fuel
Calibration. Briefly pressing the “Mode”
button cycles through the menu items. The
microprocessor will automatically record
th
e new settings as you adjust them.
Reset
Pressing the “Up” and “Down” button
resets the Fuel Used gauge to zero.
Calibration
If you know “exactly” how much fuel you
have used since the Fuel Used gauge was
reset you can adjust the amount and
therefore the Fuel Flow sensor calibration
in this “setting” menu.
Pressing the “Up” or “Down” buttons
changes the “amount of fuel used” display.
When the displayed quantity matches the
amount of
fuel you know you have used,
calibration is complete.
Total Fuel Used
The
Total Fuel Used display shows the
amount of
fuel used since the Total Fuel
Used gauge was reset.
This g
auge is useful for keeping track of
fuel usage over a longer period of time or
distance than the Fuel
Used gauge. The
display is based on the fuel flow system
and therefore filling the fuel tank will not
disturb the reading.
The T
otal Fuel Used gauge may be reset to
zero using the submenu. Pressing and
holding the “Mode” button causes the
display to change to the “settings” submenu
(see Figure 1).
Total Fuel Used “Settings” Menu
There is one item in the Fuel Used
“Settings” Menu; Reset.
M
Mode
Button
M
Mode
Button
Down
Button
Up
Button
Down
Button
Up
Button
Page 7
This page left blank intentionally.
M
Mode
Button