Edelbrock 71900 Automobile Parts User Manual


 
www.edelbrock.com
Page 9 of 17
Setting the Dual Nitrous Power Ramp ON/OFF
Enter the Options Menu, press and release the FUNCTION switch until the message “Dual Ramp Nitrous”
appears on the display.
Press and release the ENTER switch to turn this feature ON or OFF. After pressing the ENTER switch, the
display will show the new state of the selected option. Refer to the “Exiting the Options Menu” to return to the main
menu.
If this option is ON (Factory Default is OFF) two more selections will appear on the Main Menu. Please refer
to the section “Using the Dual Ramp Feature” for more information.
Setting Progressive Fuel Output ON/OFF
Enter the Options Menu, press and release the FUNCTION switch until the message “Progressive Fuel Solenoid
Driver” appears on the display.
Press and release the ENTER switch to turn this feature ON or OFF. After pressing the ENTER switch, the
display will show the new state of the selected option. Refer to the “Exiting the Options Menu” to return to the main
menu.
When the option is ON, the fuel output will pulsate through the entire nitrous progressive cycle. If this option
is OFF (Default), then the fuel solenoid will pulsate for the first 5 pulses and then go to 100%.
Setting Activation Wait and Hold ON/OFF
Enter the Options Menu, press and release the FUNCTION switch until the message “Progressive Fuel Solenoid
Driver” appears on the display.
Press and release the ENTER switch to turn this feature ON or OFF. After pressing the ENTER switch, the
display will show the new state of the selected option. Refer to the “Exiting the Options Menu” to return to the main
menu.
When this option is ON (Factory Default) all timers, including the progressive timers, will halt if the activation
signal (+12V) is removed and will resume when the signal is re-applied. If this option is OFF, all timers will be reset
each time the activation signal (+12V) is removed (i.e. - Each time the activation signal is applied the controller starts
at the beginning of the timing cycle).
©2008 Edelbrock Corporation
Catalog #71900
Brochure #63-0473
Rev. 08/08 - AJ/mc