Filter
Top Products
www.edelbrock.com
Page 5 of 17
Programming the +12 Volt Timer
Press and release the FUNCTION switch until the message “+12V Timer Delay” appears on the display. After
the function message has scrolled across the display, the current +12 Volt Timer setting will appear on the display.
To adjust the +12 volt timer value, press the desired digit button and the value of that digit will increment.
The digit will roll over to 0 and begin counting up again if the user continues to release and press the digit button.
To exit without saving the new value, press the FUNCTION switch and select another function.
To save the new value, press and release the ENTER switch and the display will read “SAVED” and the new
setting is now saved.
The range of the +12 volt timer is 0.000 to 9.999 seconds with a .001 second resolution.
This setting will determine the amount of time in seconds before the +12 volt timer output becomes active
(goes to +12V) after controller activation.
NOTE - Setting timer to 0.000 will disable the +12V timer output. Set to 0.001 for quick
activation.
Programming the Nitrous Delay Timer
Press and release the FUNCTION switch until the message “Nitrous Delay Timer” appears on the display. After
the function message has scrolled across the display, the current Nitrous Delay Time setting will appear on the display.
To adjust the nitrous delay timer value, press the desired digit button and the value of that digit will increment.
The digit will roll over to 0 and begin counting up again if the user continues to release and press the digit button.
To exit without saving the new value, press the FUNCTION switch and select another function.
To save the new value, press and release the ENTER switch and the display will read “SAVED” and the new
setting is now saved.
The range of the +12 volt timer is 0.000 to 9.999 seconds with a .001 second resolution.
This setting will determine the amount of time in seconds before the nitrous becomes active (nitrous begins
at starting percentage) after controller activation.
©2008 Edelbrock Corporation
Catalog #71900
Brochure #63-0473
Rev. 08/08 - AJ/mc