Filter
Top Products
69
Navigation
guidance
■ Touch switches
The following operations are enabled using the touch switches appearing on the all-
route display screen.
1
Different routes are displayed to enable a selection.
(Refer to page 73)
2
The route change screen is shown to enable the modification of the search conditions.
Also, indicating an additional transit route to the destination is possible.
(
Refer to pages 75, 77 and 80.)
3
Route guidance can be initiated.
(
Refer to page 83) After route guidance is started, the display returns to the present
location screen.
4 When two or more destinations are set, you can switch the display of the required time /
remaining distance to each of the destinations by touching the remaining distance
display. (
Refer to page 94)
If deviating from the road after route guidance has started, the distance to the destination
in a straight line is indicated.
3 Routes
Route
Guide
•The search result route is a reference route to the vicinity of the destination. In
no way is it the shortest, fastest or least congested route.
•The required time is calculated from the average vehicle speed
(Refer to page
88)
and may have a slight deviation depending on the driving conditions.
•In the following situations, 3 routes cannot be displayed.
•When 2 or more destinations are set
•When a transit road is indicated
•After route guidance has started
•An all-route diagram can be displayed even after route guidance has started.
(Refer to page 93)