Filter
Top Products
30
3. Map displays
Basic operation
Switching the map reduction scale
The map reduction scale (map range) can be switched to any desired setting from
40,960,000:1 to 5,000:1. Also, if the destination is set, you can switch to the reduction scale
showing the entire route to the destination with one touch.
To widen the map's range, touch
. To shrink it down, touch .
• Every time the touch switch is touched,
the scale goes up/down one level at a
time.
• After having touched or , touch
a number on the scale bar to switch to
the reduction scale represented by
that number.
• Touch continuously on or for at
least 1 second to switch the scale with no increments (free zoom).
• The reduction scale switched to will be indicated with a yellow mark ( ).
Touch switch
Reduction scale
Scale display Touch switch
Reduction scale
Scale display
1/0.01 million
1/0.02 million
1/0.04 million
1/0.08 million
1/0.64 million
1/1.28 million
1/2.56 million
1/5.12 million
1/10.24 million
1/20.48 million
1/0.005 million
150ft
300ft
700ft
0.25mi
0.5mi
4mi
8mi
16mi
30mi
60mi
130mi
1/40.96 million
250mi
1/0.16 million
1/0.32 million
1mi
2mi
Switching to the desired reduction scale
Scale bar
•The switch will disappear when setting to the maximum range (250 mile
scale diagram).
•For safety reasons, the scale cannot be free zoomed while driving.