Eclipse - Fujitsu Ten AVN5435 GPS Receiver User Manual


 
134
1. Correction of the present location and distance
Helpful tips
Correcting the distance
Touch in the MENU screen.
Touch for Calibration.
Touch .
Automatic correction is performed.
The touch switch turns green during
automatic correction.
Using GPS data, the correction will
automatically be completed after
driving a moment and the touch switch
will turn back to blue.
Setup
Adjust
Tire Change
•The device performs automatic distance correction (automatic correction) using
GPS and vehicle speed signals. This may be delayed in the event of a sharp
deviation that overwhelms the automatic correction function (changing a tire,
being towed by another vehicle, etc.)
In such a case, drive about 6 miles along a road indicated by favorable GPS
signal reception conditions.
•If correction is impossible, have the device inspected at the store of purchase.
•During automatic correction, the vehicle position may be misaligned.
•Even if the automatic correction is complete, because the distance correction
has a learning function, there may be variations in the progression of the
vehicle position mark depending on the driving conditions.