D-Link DCS-5010L Automobile Electronics User Manual


 
35D-Link DCS-5010L User Manual 35
Section 3 - Conguration
File:
Enable the
uploading of
video clip to an
FTP server:
File Name
Prex:
Video Limit:
Test FTP Server:
Select how you want uploading of snapshots to be handled:
Overwrite will replace the old snapshot with the new one.
This means you will only have one snapshot that is updated
every time a new one is taken.
Date/Time Suffix will add the date and time to the end of the
snapshot file name. You can also choose to make subfolders
based on a period of time you specify to help you organize
your snapshots.
Sequence Number Suffix will add a number to the end of the
snapshot file name up to the number you specify, after which
the oldest files will be overwritten.
Enabling this will allow video clips to be uploaded to your FTP server
in various ways.
Choosing Always will upload video continuously, based on
the Video Limit specified below.
Choosing Schedule will allow you to schedule when to start
and stop the uploading of video.
Select Motion/Sound Detection if you would like the camera
to upload video only when motion or sound is detected.
Set the desired base le name for your videos.
Specify the maximum file size and duration of the videos to be
uploaded.
Clicking on the Test button will send a test JPEG snapshot to the FTP
server specied above to make sure that your settings are correct.