D-Link DCS-5010L Automobile Electronics User Manual


 
10D-Link DCS-5010L User Manual
Section 2 - Installation
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Conguration Setup. Zero Conguration
automatically congures your camera's settings for you, and adds the camera to your mydlink account automatically. This type
of setup allows you to set up your camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Conguration will automatically congure your DCS-5010L
and add the camera to your mydlink account. After the short time it takes to do this you can remotely access your camera from
the website (http://www.mydlink.com) to manage and monitor your DCS-5010L.
Zero Conguration Setup
Connect the Ethernet Cable and Power Cable
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available port on your D-link Cloud Router. If you wish to use
your camera wirelessly, you will be able to remove the cable after Zero
Conguration Setup is complete. You can also plug the external power adapter
cable into the camera at this time.
Attach the External Power Adapter
Plug the power adapter in to a wall outlet.