D-Link DCS-5010L Automobile Electronics User Manual


  Open as PDF
of 48
 
28D-Link DCS-5010L User Manual 28
Section 3 - Conguration
Image Setup
If you have lights flickering in your camera video, try enabling
antiicker. Otherwise, you should leave this disabled.
Select this box to vertically ip the video.
Horizontally ip the video.
Note: If the camera is installed upside down, Flip Image and Mirror
should both be checked
Allows you to adjust the brightness level. Select a setting between
-5 and +5.
Allows you to adjust the contrast level. Select a setting between -5
and +5.
Allows you to adjust the saturation level. Select a setting between -5
and +5.
Enable
Antiicker:
Flip Image:
Mirror:
Brightness
Control:
Contrast
Control:
Saturation
Control:
This section allows you to congure the image settings for your camera.
 previous next