Filter
Top Products
6
©
2000 Directed Electronics, Inc.
Using Your System
Remember, use of the buttons described in all instructions in this
manual corresponds to the Standard Configuration, unless other-
wise specified.
You can arm the security system and lock your vehicle's doors by
pressing for one second. When the system arms, you will hear
a short siren sound (chirp) and the parking lights will flash once.
Once armed, the status LED will flash once per second to indicate
that the system is actively protecting your vehicle. If you hear a
second chirp after arming and notice that the status LED is flash-
ing in a grouped pattern, this signals Bypass Notification. Bypass
Notification is described in further detail in the Diagnostics section
of this manual.
Your vehicle security system can also be programmed to arm itself
automatically 30 seconds after the ignition is turned off and the
last vehicle door has been closed (called Passive Arming). Once the
30-second countdown period initiates, the status LED will flash
twice as fast as it does when the system is armed. After 20
seconds, the siren will chirp once to warn that the system has only
10 seconds remaining prior to arming. The system is not actually
armed at this point. The system arms itself at the 30-second mark.
At this point, the vehicle doors will also lock (if programmed for
Arming