Filter
Top Products
Use the Silent Mode to temporarily turn off the arm or disarm
confirmation chirps by briefly pressing before either
arming or disarming. The confirmation chirp(s) will then be
eliminated for that one operation only. To permanently turn off
the arm and disarm confirmation chirps, contact your installation
dealer.
NOTE: The Warn Away Response to lighter impacts is bypassed if the
security system is armed using the Silent Mode. This ensures that the
siren does not chirp in an environment where you don't want chirps to be
emitted. The security system is still capable of being triggered by heav-
ier impacts; only the Warn Away Response generated by light impacts is
bypassed.
If you are threatened in or near your vehicle, press on your
transmitter for 1.5 seconds to trigger your security system and
attract attention. The siren will sound and the parking lights will
flash for 30 seconds. To stop the Panic Mode at any time, press
, , or .
Valet Mode prevents your security system from arming and trigger-
ing either automatically or with the remote transmitter. In Valet
Mode, all convenience functions (door locks, trunk release, etc.)
remain operational. This feature is useful when washing or servicing
your vehicle.
Valet Mode
Panic Mode
Silent Mode
10
©
2000 Directed Electronics, Inc.