Filter
Top Products
A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input
assignments are listed below, along with spaces to write in any
optional sensors or switches that have been installed.
ZONE
(Number of DEALER-INSTALLED
LED Flashes) DESCRIPTION OPTIONS
1
Instant trigger - often used
for hood/trunk pinswitches
2 Instant trigger - a heavier impact
detected by the Shock Sensor
3 Door switch trigger
4 Instant trigger - for optional
sensors
5 Ignition trigger
Owner Recognition
Using a system programming device, your dealer can program spe-
cific system settings for each remote used with your system. Then,
whenever a specific remote is used, the system is capable of recall-
ing the individual settings of each remote. This feature allows up
to four remotes to be used with the same system. It’s almost like
having four separate alarms in your vehicle - one for each user.
NOTE: Owner Recognition cannot be programmed without a system pro-
gramming device and the necessary software. Check with your dealer for
more information.
Table of Zones
14
©
2000 Directed Electronics, Inc.