Filter
Top Products
8
©
2000 Directed Electronics, Inc.
This feature provides added security while travelling in an unfa-
miliar or potentially dangerous area. To arm your security system
while driving, press on the transmitter for 1.5 seconds while
the vehicle is running or the ignition is on. You will hear one chirp
that confirms the system has been armed, followed by another
chirp that indicates the ignition is on. While the vehicle is
running, the security system will not respond to any input except
the door triggers; the starter interrupt relay will also be disarmed.
When the ignition is turned off, the security system will disarm
automatically. This will be confirmed when the siren chirps twice
and the LED stops flashing.
Press to disarm the security system, unlock the doors, and
turn on the dome light for 30 seconds. Disarming is confirmed
when the parking lights flash twice and the siren emits two chirps.
The status LED will also stop flashing. The siren chirping either
four or five times when disarming indicates Tamper Alert, which is
described in the Diagnostics section of this manual.
High Security Disarm allows you to silence and reset the security
system when it is triggered, without having to disarm the system.
This prevents you from having to visually check your vehicle when
the system has been triggered. If the siren has been sounding for
High Security Disarm
Disarming
Arming While Driving