Filter
Top Products
26
panic on/off
z
On: The panic feature is available.
z
Off: The panic feature is not available.
user selectable features descriptions - column three
The features in this column pertain to programming individual trans-
mitter channels in custom configurations. Following is an explanation
of the features. To program specific functions to a different button,
enter the function you are programming after the chirp confirmation.
Press the button with which you wish to control that feature; the sys-
tem will chirp to confirm that it has learned the new button.
arm/disarm only
z
The remote control channel programmed into this feature
will arm/disarm the system only.
accessory output
z
The transmitter channel programmed into this feature will
activate the accessory output.
silent mode
z
The transmitter channel programmed into this feature will
arm/disarm the system, but the siren will not chirp.
nnoottee::
When programming a remote control to custom configuration, a
transmitter button must first be learned to the arm/disarm channel by
pressing the desired button once (one chirp), then again (two chirps).
The rest of the features in this column can then be learned by pressing
the desired button once. The siren will chirp the same number of times
as the feature row as confirmation.